宠物小精灵Ds怎么把背包里的精灵和手中的精灵交换

1.按x键

2.再按‘背包’

3.对着你手中的精灵按a键

4.按‘交换’

5.再选要交换的精灵，按a键就可以了

给分吧

德国玛蒂ds使用方法

德国玛蒂ds使用方法为以1比16添加到发动机润滑油内。德国玛蒂ds可以在任何时段添加，按以1比16的配比，将250ml的玛蒂DS添加到4L对应的油中。玛蒂DS是一种新型的高度浓缩的汽车漏油问题解决产品，可为发动机、变速箱、动力转向系统中已老化、变硬的橡胶密封件补充丢失的塑化剂、软化剂等。

群晖(Synology) NAS 安装 ipkg 包管理工具

How to install IPKG on Synology NAS

As you well know, IPKG , or the Itsy Package Management System, is a lightweight package management system designed for embedded devices and it resembles Linux Debian’s dpkg. It was used in the Unslung operating system for the Linksys NSLU2 (Optware), in OpenWrt, Openmoko, webOS, Gumstix, the iPAQ, QNAP NAS appliances and elsewhere; as of early 2017 it can still be used for Synology NAS DSM appliances and in the LuneOS operating system (although opkg is an increasingly common replacement).

As usual, for package management systems, ipkg’s ipkg command-line utility allows for the installation of new packages, the upgrading or removal of existing packages, querying package repositories for available packages, and listing already installed packages. The development for this project has been discontinued. Many projects which formerly used IPKG have adopted the IPKG fork opkg as a replacement.

I just wanted to share how I installed IPKG on my Synology DS718+. You can also install it on different Synology devices by following the instructions below. To be clear, the installation process should be the same for other Synology Disk Stations and unfold without any problem.

First of all go to the Synology Package Center, click on “ Settings ” on the top, right corner, and then click on “ Package Sources “. Add the source “ ” (you can choose the name you want, i.e. “CPHUB”). Follow the instructions in the image below:

After clicking OK , you should see a new “ Community ” tab in the package center on the left. Find and install “ Easy Bootstrap Installer ” from QTip. There is also a GUI Version if you’d prefer, called “ iPKGui “, also from QTip. Follow the instructions in the image below:

IPKG is now installed. The executables are located in “ /opt/bin/ “. You can SSH your NAS and use it. However, the directory has not yet been added to the PATH variable, so to use it you would need to use the full path “ /opt/bin/ipkg “. You can add the directory to the PATH variable using the following command:

export PATH=”$PATH:/opt/bin”

However, this would only add the directory to PATH for the current session. To make the change permanent, you need to edit the “ /etc/profile “. To do that, I used the “ nano ” editor, but I had to install it first. Run the following commands:

sudo /opt/bin/ipkg update

sudo /opt/bin/ipkg install nano

sudo /opt/bin/nano /etc/profile

Now find the PATH variable. It should look something like this:

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/syno/sbin:/usr/syno/bin:/usr/local/sbin:/usr/local/bin

At the end of this string, just append “ :/opt/bin “(don’t forget the colon). Then save and close the file ( CTRL + “O” , then Enter , then CTRL + “X” ).

Note that this will not automatically update your PATH for the current session. To do this, you can run:

source /etc/profile

To check whether it worked, enter the command:

echo $PATH | tr “:” “\n” | nl

You should see the entry for “ /opt/bin ” there. Now you’re all set. I hope this little guide will help those of you who want to install IPKG on Synology Nas.

Here you can install Entware.

This post was updated on Saturday / January 18th, 2020 at 7:16 PM

安装 socat

ipgk install socat